 |
屬性 | |
| 屬性 | ||
| 屬性 | ||
| 屬性 | ||
| 屬性 | ||
| 屬性 | ||
| 屬性 | ||
| 屬性 | ||
| 下載 |  | |
Product information "KIT_A2G_TC387_5V_TRB_S"
KIT_A2G_TC387_5V_TRB_S
With this general purpose AURIX™ TC387QP evaluation board, customers can quickly start to develop, evaluate and test their software. The TC387QP is an Emulation Device capable of non-destructive tracing on dedicated 4MB SRAM. This SRAM can be configured to be used by a standard application.
The board features various communication interfaces such as CAN FD, Gigabit Ethernet, SPI and FlexRay. It also gives access to all the digital and analog IOs available from the LFGBA292 package of microcontroller.
A downloadable User Manual helps with the installation, use and configuration of the board and includes the schematics and the layout. The schematics can serve a solid reference design for hardware engineers.
Thanks to the scalability of the AURIX™ family, this board is compatible to all other AURIX™ in the BGA292 package.
Summary of Features:
• Infineon’s TC387 (TC387) AURIX™ 2G Controller in LFBGA-292 Package, socketed
• FlexRay™ 1) Transceivers
• High Speed CAN Transceivers (CAN-FD capable)
• USB to UART bridge
• Ethernet Gigabit PHY
• Serial Eeprom
• LIN Transceiver
• Crystal 20MHz (default) or External Clock
• USB miniWiggler JDS for easy debugging
• 8 Low Power Status LEDs
• 8-DIP switches for configuration
• access to all pins of controller
• 100mm x 160mm (EURO-Board)
Connectors
The TC3X7 TriBoard offers a wide variety of connectors:
• Standard power connector
• Micro USB connector for ASC Interface (ASC0) and miniWiggler
• RJ45 connector for Ethernet
•1 6-pin header for JTAG interface (OCDS)
• 2 x 10-pin header for DAP and DAPE (DAPE only usable on Emulation Device)
• 10pin (2x5) Header for LIN Transceiver (LIN)
• 2 x 10pin (2x5) Header for CAN High Speed Transceiver (CAN0 and CAN1)
• 2 x 10pin (2x5) Header for FlexRay™ (ERAY-A and ERAY-B)
• four 80-pin connectors (male) + four 80-pin connectors (female) with all I/O signals
• optional ETK connector
• optional 6pin (IEEE1394) Socket for HSCT
• optional Aurora connector (only with Emulation Device)
Components
• Infineon’s Multi Voltage Safety Micro Processor Supply TLF35584QV
• Three LEDs to validate power supply (5Volt / 3,3 Volt / 1,25 Volt)
• LED indicating safe state signal 2 from TLF35584
• LED indicating /HDRST (ESR0) active state
• LED indicating activ miniWiggler JDS
• LED switched via DAS software
• 2 x Infineon’s FlexRay™ Transceiver TLE9221SX
• 2 x Infineon’s High Speed CAN-Transceiver TLE9251VSJ
• Infineon’s LIN-Transceiver TLE 7259-3GE
• USB to UART bridge FT2232HL (FTDI)
• Single Port Gigabit Ethernet PHY PEF7071 (LANTIQ)
• 8 general purpose LEDs
Features
• 2K I 2C Serial Eeprom with EUI-48™ 1) Node Identity (MICROCHIP)
• Reset switch
• Enable switch
• Generic switch
• 4-pin Dip switch
Benefits:
With our software toolchain, this TriBoard offers a quick hands on and evaluation of Aurix™ 2G.
Target Applications:
• Automotive
• Sensor Fusion
Chassis
• eVehicles
• Powertrain
• Industrial